ADP - 1102 - S5A - (120Vac-5A and 24Vac-10A coils with 24Vac switching and a manual override Test/Run Switch)
HMI Interface Relay Adaptors
|HMI Hoyme ADP- 1102 - S5A|
120Vac Interlocking Relay Adaptor: for combustion fresh air inlet dampers and Flue Dampers using 120Vac safety control systems. Dampers prove to be open before fire starts.
This Adaptor, with two relays, senses a line voltage stat, proves a 24Vac damper to be open and then sends a signal back to line stat circuit for firing.
Comes with 120Vac relay, 24Vac relay & Test/Run switch.
Also ideal for commercial use.
Colored Wiring Diagrams used with the ADP-1102-S5A
Basic Wiring Diagram - ADP-1102-S5A
#. - Typical Installation Diagram - ADP-1102-S5A
Last Updated (Thursday, 27 October 2016 14:23)