ADP - 0241 - 10A - (24Vac coil with 120Vac switching up to 5A or 10A)
HMI Interface Relay Adaptors
|HMI Hoyme ADP- 0241- 10A|
This Relay Adaptor may be used as an automatic switch having a 24Vac coil and 120Vac contact points to control a line voltage circuit for up to a 10 amp draw.
i.e. Exhaust Fan. Adaptor can also be used 100% for 24Vac switching (See ADP-1101-05A). Switching 24Vac dampers and thermostat circuits use ADP-0241-05A type only and for 120Vac fan control, use ADP-0241-10A type only.
Colored Wiring Diagrams used with the ADP-0241-10A
#8B1. 24Vac vent switch with relay, replacement air damper Power Close with exhaust fan
#8B3. 24Vac vent controlled by switch & replacement air damper Power Open also during call for heat
Last Updated (Tuesday, 20 September 2016 09:51)