Home Products ADP - Interface Relay Adaptors ...24Vac Coil RADP-0242-S10A

RADP - 0242 - S10A (24Vac coil - 120Vac Contacts - with switch and receptacle)

HMI Interface Relay Adaptors 



HMI Hoyme RADP- 0242- S10A


This interface Adaptor RADP-0242-S10A is an interlocking control device to safely supply fresh air for a dryer/damper/furnace combination. The Adaptor has a manual red light switch that, when turned on, the fresh air damper opens proving its position prior to
  gas dryer   operation (Interlocked).

  This Adaptor may be interlocked  to dampers:

- HOM-0x11-SF1
- HOM-0x12-SF2,   secondary circuit;
- HAC/MAC-0x11-SPC;
- HAC/MAC-0x10-SPO;

This Adaptor may also be interconnected to simultaneously turn on a Furnace Circulation Fan and open an HAC replacement air damper, if used, on a furnace return plenum. HAC Damper may also open during furnace firing. Damper(s) remain open until the red light switch is manually turned off.


Installation Instructions - Printer friendly (pdf)

Colored Wiring Diagrams used with the RADP-0242-S10A

#8B4. Forced Air Furnace with a replacement air supply duct controlled by a fresh air Power Open Damper

#8B5. Forced Air Furnace with a replacement air supply duct controlled by a fresh air Power Open Damper

#8B6. Forced Air Furnace with a replacement air supply duct controlled by a fresh air Power Open Damper
 

  RADP-0242-S10A

Last Updated (Tuesday, 20 September 2016 11:38)