Home Support Colored Wiring Diagrams #8 - #8A9 #8A5

Colored Wiring Diagram #8A5

Forced Air Furnace having a combustion air supply duct that also serves as an air supply for a 120Vac gas dryer

HMI Hoyme Manufacturing Inc. Special Note: Circuits are colored for clarification only and are not necessarily those found in actual installations.Wires of the Combustion Air Damper, however, are colored as shown.
 Color Wiring Diagram #8A5
Diagram #8A5: Forced Air Furnace having a combustion air supply duct and also a replacement air supply duct that provides additional air for a 120Vac gas dryer and for the normal operation of the home.

1. Combustion Air Damper (HOM-0x12-SF2) for two appliances. 
2. 24Vac Relay Adaptorwith a Duplex Receptacle and a Red Light on/off Switch (RADP-0241-S10A) to function as a control centre interlocked to120Vac supply for a plug-in type Gas Dryer. 
3. Replacement Air Control Damper (Power Open) HAC-0x10- OPO (‘x’= diameter of duct).

OPERATION: 
1. Combustion Air Damper is interlocked to open for furnace firing and/or interlocked to open for dryer operation. 
2. The Gas Dryer is plugged into the Adaptor RADP-0241-S10A receptacle and will operate only after the Red Light Switch is turned on and the Combustion Air Damper is in the open position. 
3. The HAC-0x10- OPO (Power Open) damper will open and close simultaneously with the Combustion Air Damper. When the Dryer has completed its cycle, the Adaptor Red Light Switch is to be turned off allowing the Combustion Air Damper and the Replacement Air Damper to close.

Note: Manual setting of the furnace fan does not affect the Combustion Air Damper operation.

This installation does not interfere with the operation of the Air Conditioner.

1222-ld - Printed in Canada
 
Printer friendly (pdf) - (Opens in a new window)

Last Updated (Friday, 09 November 2012 16:07)