Home Products ADP - Interface Relay Adaptors ...24Vac Coil RADP-0241-S10A

RADP - 0241 - S10A (24Vac coil - 120Vac Contacts - with switch and receptacle)

HMI Interface Relay Adaptors 



HMI Hoyme RADP- 0241- S10A

This interface Adaptor  RADP-0241-S10A is an interlocking control device to safely supply fresh air for a dryer/damper/furnace combination. The Adaptor has a manual red light switch that, when turned on, the fresh air damper opens proving its position prior to gas dryer operation  (Interlocked).

This Adaptor may be  interlocked  to dampers:
- HOM-0x11-SF1
- HOM-0x12-SF2,  secondary circuit;
- HAC/MAC-0x11-SPC;
- HAC/MAC-0x10-SPO;


Installation Instructions - Printer friendly (pdf)

Colored Wiring Diagrams used with the RADP-0241-S10A


#8A3. Forced air furnace with Combustion air damper which also supplies replacement air for 120 Vac gas dryer      

#8A4.
Forced Air Furnace having a combustion air supply duct and also a replacement air duct(PC) that serves as an air supply for a 120Vac gas dryer      

#8A5.
Forced Air Furnace having a combustion air supply duct and also a replacement air duct(PO) that serves as an air supply for a 120Vac gas dryer      

#8A6.
Forced air furnace with MAC air damper which also supplies replacement air for 120 Vac gas dryer      

#8A7.
Forced Air Furnace having a MAC air supply duct and also a replacement air duct(PC) that serves as an air supply for a 120Vac gas dryer      

#8A8.
Forced Air Furnace having a MAC air supply duct and also a replacement air duct(PO) that serves as an air supply for a 120Vac gas dryer      

  RADP-0241-S10A

Last Updated (Tuesday, 20 September 2016 11:37)