Home Products ADP - Interface Relay Adaptors ...110 & 24 Vac coil ADP-1102-TW5

ADP - 1102 - TW5 - (120Vac controlled line voltage to Switch 24Vac)

HMI Interface Relay Adaptors


HMI Hoyme ADP- 1102 - TW5
This Adaptor ADP-1102-TW5 is an automatic relay control switch specifically designed, but not limited, to accommodate two separate exhaust fans in a dwelling interconnected to one furnace having a replacement air duct and (if used) a replacement air damper. A controlled 120Vac signal from one exhaust fan and/or a controlled 24Vac signal (or dry contacts) from a second exhaust fan will simultaneously turn on the furnace circulation fan and open the replacement air damper.

Installation instructions - Printer friendly (pdf)


Colored Wiring Diagrams used with the ADP-1102-TW5 

#. - Basic Wiring Diagram - ADP-1102-TW5  - Opens in a new window


ADP-1102-TW5 - Interface Relay Adpator
 

Last Updated (Tuesday, 20 September 2016 11:43)