HMI Hoyme RADP – 0241 – 10A
This Interface Adaptor comes with a Relay 24Vac Coil SPDT to develop a 10A contact capacity and a Relay 24Vac Coil DPDT to develop multiple contact points together with a split Duplex Receptacle. The split Receptacle provides a controlled plus a continuous 120Vac power supply outlet. The two 24Vac Coils are connected in parallel and therefore act as one Relay. This Adaptor allows for a 24Vac Circuit such as a Furnace safety control Circuit or a 24Vac Damper with End Switch to control a 120Vac PLUG-IN Fan for ventilation, zone control or fresh air control.
Installation Instructions – Printer friendly (pdf)
Wiring Diagram used with the RADP-0241-10A:
- #7B. One Power Close Replacement Air Damper (-PC), One Adaptor (RADP-0241-10A) c/w 120vac controlled receptacle, Two 24vac transformers, Two Power Open Air Dampers (HAC-0x10-SPO) c/w End Switches to Control Adaptor.
- #8A2. One Power Open Replacement Air Damper (-PO), One Adaptor (RADP-0241-10A) c/w 120vac controlled receptacle, Two 24vac transformers, Two Power Open Air Dampers (HAC-0x10-SPO) c/w End Switches to Control Adaptor.
