HMI Hoyme RADP – 0241 – S10A
This interface Adaptor RADP-0241-S10A is an interlocking control device to safely supply fresh air for a Dryer/Damper/Furnace combination. The Adaptor has a manual red light switch that, when turned on, the Fresh Air Damper opens proving its position prior to Gas Dryer operation (Interlocked).
This Adaptor may be interlocked to Dampers:
- HOM-0x11-SF1
- HOM-0x12-SF2, secondary circuit
- HAC/MAC-0x11-SPC
- HAC/MAC-0x10-SPO
This Adaptor may also be interconnected to simultaneously turn on a Furnace Circulation Fan and open an HAC Replacement Air Damper, if used, on a Furnace return Plenum. Damper(s) remain open until the red light switch is manually turned off.
Installation Instructions – Printer friendly (pdf)
Wiring Diagrams used with the RADP-0241-S10A:
- #8A3. Forced Air Furnace With Combustion Air Damper (HOM-0x12-SF2) Which Also Supplies Replacement Air For 120vac Gas Dryer Using adaptor (RADP-0241-S10A).
- #8A4. Forced Air Furnace With Combustion Air Damper (HOM-0x12-SF2) and Power Close Replacement Air Damper (HAC-0x10-OPC) Which Supplies Replacement Air For 120vac Gas Dryer Using adaptor (RADP-0241-S10A).
- #8A5. Forced Air Furnace With Combustion Air Damper (HOM-0x12-SF2) and Power Open Replacement Air Damper (HAC-0x10-OPO) Which Supplies Replacement Air For 120vac Gas Dryer Using adaptor (RADP-0241-S10A).
- #8A6. Forced Air Furnace With MAC Power Close Air Supply Damper (MAC-0x11-SPC) Which Supplies Replacement Air For 120vac Gas Dryer Using adaptor (RADP-0241-S10A).
- #8A7. Forced Air Furnace With Replacement Air Damper (HAC-0x10-OPC) and MAC Power Close Air Supply Damper (MAC-0x11-SPC) Which Supplies Replacement Air For 120vac Gas Dryer Using adaptor (RADP-0241-S10A).
- #8A8. Forced Air Furnace With Power Open Replacement Air Damper (HAC-0x10-OPO) and MAC Power Close Air Supply Damper (MAC-0x11-SPC) Which Supplies Replacement Air For 120vac Gas Dryer Using adaptor (RADP-0241-S10A).
