Hoyme-ADP-1102-TPX

This Adaptor acts as a control center activated by a 120Vac Ventilation Switch to:

• (1) Open a 24Vac Fresh Air Inlet Damper equipped with an End Switch
• (2) Simultaneously turn on the Furnace Circulation Fan
• (3) Turn on a 120Vac Exhaust Fan after Damper proves to be open (Interlocked)

Installation Instructions – Printer friendly (pdf)

Wiring Diagrams used with the ADP-1102-TPX:

• #11. Forced Air Furnace With Combustion Air Damper (HOM-0x11-SF1) and a Power Close Replacement Air Damper (HAC-0x11-SPC) c/w End Switch that uses Adaptor (ADP-1102-TPX) That Proves Replacement Air Damper is Opened Before Exhaust Fan and Furnace Fan Runs With Ventilation Switch and Both Dampers Open During Furnace Firing.
• #12. Forced Air Furnace With Power Close Replacement Air Damper (HAC-0x11-SPC) c/w Relay and End Switch that uses Adaptor (ADP-1102-TPX) to Prove Replacement Air Damper is Open Before Ventilation Fan and Furnace Fan Run With Ventilation Switch and Also Opens During Furnace Firing.
• #12B. Same as #12 But Uses a Power Open Replacement Air Damper (HAC-0x10-SPO) c/w End Switch; But Damper Does Not Open During Furnace Firing. (See #12B1).
• #12B1. Same as #12B But Uses Adaptor (ADP-1103-TPX) so that Damper Will Open During Furnace Firing.
• #12B4. Same as #12B3 But Uses Adaptor (ADP-1103-TPX) with the Adaptor (ADP-1102-TPX) so Damper Also Opens During Furnace Firing.
• #12C. High Volume Kitchen Exhaust Fan and An Inlet Supply Fan Interconnected to a Forced Air Heating System with an Interlocking Inlet Power Open Replacement Air Damper (HAC-0x10-SPO) c/w End Switch and an Adaptor (ADP-1102-TPX) But Replacement Air Damper Does Not Open During Furnace Firing.
• #12D. Same as #12C But Also Includes a Separate Inlet Replacement Air Damper (HAC-0x10-OPO) and Adaptor (ADP-1101-05A) and Bathroom Fan with Designated Ventilation Switch, But Both Replacement Air Dampers Do Not Open During Furnace Firing.
• #12D1. Same as #12C But Uses Adaptor (ADP-1102-TWP) To Open The Furnace Replacement Air Damper During Furnace Firing.