Home Products ADP - Interface Relay Adaptors ...110 & 24 Vac coil TMADP-1102-TPX

TMADP - 1102 - TPX - (120Vac-5A and 24Vac-10A coils with 24Vac switching, Interlocked with a Timer)

HMI   Interface Relay Adaptors

HMI Hoyme TMADP- 1102 - TPX

This TMADP-1102-TPX adaptor with two relays and a 24Vac interva­l timer, together with a central ventila­tion switch,  acts as an automatic/manual con­trol cen­tre to simultaneously start a principal exhaust fan, turn on a fur­nace fan, and open a fresh air inlet dampe­r (If used) .

Installation Instructions - Printer friendly (pdf)  

Instructions for Timer alone


Instructions for Timer alone - Printer friendly (pdf)  


Colored Wiring Diagrams used with the TMADP-1102-TPX


#9. Timer, vent switch, combustion air, and replacement air

#9A.
Timer, vent switch and replacement air, Power Close

#9A1.
Timer, vent switch and replacement air, Power Open

#9A2. Timer Adaptor combined with ADP-1101-05A Adaptor

#9A4. 120Vac Vent Fans, Vent Switch, Timer Adaptor with 1102-TWP Adaptor, Replacement air damper (Power Open)

#9A5. 120Vac Vent Fans, Vent Switch, Timer Adaptor with 1102-TWP Adaptor, Replacement air damper (Power Close)

#9B. Timer, 3-way vent switch and replacement air

#9B1. Timer, vent switch, replacement air damper, Power Open and a 3-way ventilation switch

#9C. Timer, vent switch, replacement air, Power Close, and an exhaust fan with 3-way ventilation switch

#9C1. Timer, vent switch, replacement air, Power Open, and an exhaust fan with 3-way ventilation switch

#10. Timer, vent switch and replacement air opens during firing

TMADP-1102-TPX

Last Updated (Tuesday, 20 September 2016 11:48)