HMI Hoyme RADP – 0242 – S10A
This interface Adaptor RADP-0242-S10A is an interlocking control device to safely supply fresh air for a Dryer/Damper/Furnace combination. The Adaptor has a manual red light switch that, when turned on, the Fresh Air Damper opens proving its position prior to Gas Dryer operation (Interlocked).
This Adaptor may be interlocked to dampers:
– HOM-0x11-SF1
– HOM-0x12-SF2, secondary circuit
– HAC/MAC-0x11-SPC
– HAC/MAC-0x10-SPO
This Adaptor may also be interconnected to simultaneously turn on a Furnace Circulation Fan and open an HAC Replacement Air Damper, if used, on a Furnace return Plenum. HAC Damper may also open during Furnace firing. Damper(s) remain open until the red light switch is manually turned off.
Installation Instructions – Printer friendly (pdf)
Wiring Diagrams used with the RADP-0242-S10A:
- #8B4. Forced Air Furnace With Combustion Air Damper (HOM-0x12-SF2) and a Power Open Replacement Air Damper (HAC-0x10-OPO) that uses Adaptor (RADP-1102-S10A) to Supply Replacement Air for the 120vac Gas Dryer.
- #8B5. Forced Air Furnace With Power Close Replacement Air Damper (MAC-0x11-SPC) and a Power Close Replacement Air Damper (HAC-0x10-OPC) that uses Adaptor (RADP-0242-S10A) to Supply Replacement Air for the 120vac Gas Dryer.
- #8B6. Forced Air Furnace With Power Close Replacement Air Damper (MAC-0x11-SPC) and a Power Open Replacement Air Damper (HAC-0x10-OPO) that uses Adaptor (RADP-0242-S10A) to Supply Replacement Air for the 120vac Gas Dryer.
