Hoyme-ADP-1101-10AS

This Adaptor ADP-1101-10AS is an automatic control switch designed to operate with ADP-1101-05A or with ADP-1102-TWP to:

1. Be connected to two Exhaust Fans, either one to operate from its own Exhaust Fan switch but is interlocked to prevent the two Exhaust Fans from operating at the same time;
2. To simultaneously turn on the Furnace Circulation Fan for either Exhaust Fan;
3. To simultaneously open a Replacement/ Ventilation Damper (if used) for either Exhaust Fan.
   Note: If the Replacement Air Damper is to also open during the firing cycle of the Furnace, replace ADP-1101-05A with ADP-1102-TWP.

Installation instructions – Printer friendly (pdf)

Wiring Diagrams used with the ADP-1101-10AS:

• #5B2. One Furnace, No Combustion Air Damper, Two 120vac Ventilation Fans, One Power Open Replacement Air Damper (-PO), One (ADP-1101-05A), One (ADP-1101-10AS).
• #5B3. Two 120vac Ventilation Fans, One Power Close Replacement Air Damper (-PC), One (ADP-1101-05A), One (ADP-1101-10AS).
• #6A7. Two Separate 120vac Ventilation Fans (One Primary and One Secondary), Two Adaptors (ADP-1102-TWP) and (ADP-1101-10AS), One Power Open Replacement Air Damper (-PO), Opens During Furnace Firing.
• #6A8. Two 120vac Ventilation Fan Switches (One Primary and One Secondary Ventilation Fans), Two Adaptors (ADP-1102-TWP) and (ADP-1102-10AS), One Power Close Replacement Air Damper (-PC), Opens During Furnace Firing.