Hoyme Product names and code numbers and what they mean -( pdf)
Hoyme Basic Product line Identification
Motorized Dampers
- HOM – Combustion Air Damper
- MAC – Terminating End – Make up Air Damper
- HAC – Fresh air/Universal Inline Damper
- HAC – F – Flue Damper
- MOH – Motorized Hood Damper
- HCR – Custom Square/Rectangular Dampers
- HSI – Custom Slip-in Type Dampers
- FCPC – Fireplace Chimney Cap
—————————————–
Other Dampers
- BDD – Back Draft Damper
- BPD – Back Pressure Damper
- BDH – Back Draft Hood
- OOH – All Weather Hood
- ADP – Interface Relay Adaptor
——————————————
HAE – Hoyme Furnace Fan Generated Air Exchanger
——————————————
HLS – Heat Limit Switch
—————————————-
EWS – Emergency Water Shut-off
—————————————-
HAC Motor Identification – HAC- 0x ?? -xPx
- Code numbers ‘??’|
- in part number |
- to indicate motor | Motor Type
- 1x – 1 Small Hansen motor 24 Vac – Spring Return
- (x indicates relay option)
- 2x – 2 Small Hansen motors 24 Vac – Spring Return – (Legacy Product replaced by -5x MS10A)
- (x indicates relay option)
- 30 – Belimo LMB 24-3-T (Requires 3 Wires On/Off)
- 34 – Belimo CMB 24-3-T (Requires 3 Wires On/Off – Floating Point 24 Vac/Dc)
- 40 – Belimo TF24 Spring Return (24 Vac On/Off – Spring Return)
- 44 – Belimo TF 120 (120 Vac On/Off – Spring Return)
- 5x – MS10A (On/Off Spring Return) Actuator 24 Vac with ¼ ” Drive
- (x indicates relay option)
- 60 – Belimo LMB 24SR-T (Requires 3 Wires – Modulating Type)
- 70 – Belimo LMX 120 (120 Vac 3 Wire On/Off)
- 80 – Belimo FSLF 120 (120 Vac Fire and Smoke)
- 90 – Belimo FSLF 24 (24 Vac Fire and Smoke)
- 88 – Belimo FSLF 230 (230 Vac Fire and Smoke)
HAC Series – After Codes – [HAC-xxxx-xPx -? ]
SKU # | Code numbers to indicate other add on features in part number
- 0 – 0 – Special order items w/ same price à see instructions for details.
- 1 – 1 – Flue “Special Order” (i.e. Flue-like Damper w/ Microswitch only and FS Belimo motor)
- 2 – B – Stainless Steel and Flue(no longer available)
- 3 – F – Flue Damper
- 4 – H – Heat
- 5 – L – Insulated
- 6 – N – Insulated and Stainless Steel(no longer available)
- 7 – S – Stainless Steel (no longer available)
- 8 – T – Timer Adaptor Kit with HAC
- 9 – Y – Stainless Steel & Heat (no longer available)
___________________________________________
Other HAC Identification HAC- 0x ?? -xPx
Examples:
- HAC – 0510- OPO – No Relay, No End Switch, Power Open Damper
- HAC – 0510- SPO – No Relay, With an End Switch, Power Open Damper
- HAC – 0510- OPC – No Relay, No End Switch, Power Close Damper
- HAC – 0510- SPC – No Relay, With an End Switch, Power Close Damper
- HAC – 0511- OPO – With a Relay, No End Switch, Power Open Damper
- HAC – 0511- SPO – With a Relay, With an End Switch, Power Open Damper
- HAC – 0511- OPC – With a Relay, No End Switch, Power Close Damper
- HAC – 0511- SPC – With a Relay, With an End Switch, Power Close Damper
HCR Series -(Rectangular) & HSI Series -(Slip in Type) – After Codes
SKU # | Code numbers to indicate motor in part number
- 0 – 0 – MS10A (On/Off Spring Return) Actuator with ¼” Drive – 24Vac
- 1 – 1 – Belimo LMX 120 (120 Vac 3 Wire On/Off)
- 2 – B – Belimo LMB24-3-T (Requires 3 Wires On/Off)
- 3 – E – Air Conditioning Economizer (usesTF24 – Spring Return Motor)
- 4 – G – Belimo TF24 – Spring Return Motor
- 5 – K – Belimo TF 120 Belimo (120 Vac On/Off – Spring Return)
- 6 – M – Belimo LMB24-SR-T (Requires 3 Wires – Modulating type)
- 7 – R – Add Relay to HCR (not applicable for HSI series
- 8 – V – Belimo FSLF 24 (24 Vac Fire and Smoke)
- 9 – W – Belimo FSLF 120 (120 Vac Fire and Smoke)
OOH Series- After Codes – [OOH 0x00-000 -V ]
SKU# | Code Letters to indicate in part number
- 8 -V – Indicates Velcro mounted Mesh instead of regular mount
HAE Series(FAN) – After Codes – [FAN-0xxx-0xx- K ]
SKU#| Code Letters to indicate in part number
- 5 -K – Indicates inline fan was purchased with HAE Furnace Fan Generated Air Exchanger.
BDH Series- After Code – [BDH 0x00-000 -G ]
SKU# | Code Letters to indicate in part number
- 4 -G – Indicates Gravity Closed instead of Spring Closed
- BDH-0x00-S00 – The “S” indicates the inclusion of an End Switch
BDD Series- After Code – [BDD 0x00-000 -B ]
SKU# | Code Letters to indicate in part number
- 2 -B – Indicates Butterfly insert type instead of Single Blade