Home Products ADP - Interface Relay Adaptors ...110 & 24 Vac coil ADP-1103-TPX

ADP - 1103 - TPX - (120Vac-5A and 24Vac-10A coils with 24Vac switching, Interlocked)

HMI Interface Relay Adaptors

HMI Hoyme ADP- 1103 - TPX

This ADP-1103-TPX adaptor with 3 relays acts as a control centre activated by a manual 120Vac ventilation switch to:
(1) Open a 24Vac fresh air inlet damper equipped with an end switch;
(2) Simultaneously turn on the furnace fan;
(3) Turn on a 120Vac exhaust fan after damper proves to be open (interlocked); and
(4) In addition, the inlet damper will also open during furnace firing.

Installation Instructions - Printer friendly (pdf)

Colored Wiring Diagrams used with the ADP-1103-TPX


#12B1. Vent switch & Interlocking Power Open Damper for replacement air, also opens on call for heat

#12B2.
Vent switch & Interlocking Power Close Damper for replacement air, also opens on call for heat

#12B4.
Two vent switches, one replacement air duct with interlocking Power Open Damper, also opens on call for heat


ADP-1103-TPX

Last Updated (Tuesday, 20 September 2016 11:51)